Figure; Figure 2-3 Attaching The Mounting Rails To The Rear Of The Cabinet; Figure 2-4 Attaching The Mounting Rail To The Front Of Cabinet - Sun Microsystems Sun StorEdge A3500 Manual

a. Face the rear of the cabinet and insert two #10 screws through the cabinet rail
and into the mounting rail bracket (
Do not tighten the screws yet.
If necessary, you can loosen the four screws that secure the mounting rail to the
mounting rail bracket. Remember to tighten the screws after making any
adjustments.
Attaching the Mounting Rails to the Rear of the Cabinet

FIGURE 2-3

b. Move to the front of the cabinet and align the mounting rails horizontally
behind the vertical rails of the cabinet (
Attaching the Mounting Rail to the Front of Cabinet
FIGURE 2-4
c. Attach the front of the mounting rails to the cabinet rails with two #8 screws.
5. Tighten the front and back mounting screws in both mounting rails.
Do not tighten the securing screws (
).
FIGURE 2-3
).
FIGURE 2-4
on page 2-12).
FIGURE 2-8
Chapter 2 Installation 2-7