Sending To More Than One Location; (Sequential Broadcasting) - Canon FAX – L900 Simplified Manual

V

SENDING TO MORE THAN ONE LOCATION

A. USING ONE-TOUCH / CODED SPEED DIAL
1. Place documents face down on the fax
2. Press all the relevant one-touch / coded-dial numbers one right after
another
3. Press START/SCAN
4. Take note of " TX / RX " number
B. MANUAL DIALING FROM THE NUMERIC 10-KEY PAD
1. Place documents face down on the fax
2. Enter one fax number
3. Press SET
4. Continue steps 2. & 3. until all the fax numbers (maximum 10
destinations) have been entered
5. Press START/SCAN
6. Take note of " TX / RX " number
C. COMBINATION OF (A) & (B)
If some destinations are from auto-dialers and some are not, follow
steps A.1. & A.2. then B.2. to B.6.
N.B. Please check on the MULTI TRANSACTION REPORT which
will be generated out after the broadcast is completed to ensure that
the broadcast is successful.

(SEQUENTIAL BROADCASTING)

9