Nose Gear - Raytheon BEECH BARON 58P Maintenance Manual

Raytheon
Aircraft
BEECH BARON 58P AND BARON 58TC MAINTENANCE MANUAL
100-HOUR INSPECTION (CONTINUED)
H. MAIN GEAR AND BRAKES (Continued)
MECH INSP
L R
3.
ACTUATOR GEARBOX, MOTOR AND SWITCHES
Check for leakage,
condition and security.
4. LANDING GEAR STRUTS Inspect the shock
struts
and
components
for
cracks,
attachment, corrosion, proper inflation and evidence of
leakage.
5.
ACTUATING LINKAGE Check for
wear
and cracks
at
attach points. Check
for condition and security.
6.
GEAR DOORS AND LINKAGE Check doors for
damage and cracks
to
the
structure
and skins. Check linkage for
wear
and cracks
at
the attach points.
Check for condition and
security.
Determine that all clevis retaining pins
are
in place and secured with
cotter
pins.
7.
STRUT FLUID LEVEL Check and maintain the proper hydraulic fluid level
in the struts
as
outlined in
Chapter
12-20-00 of this Maintenance Manual.
8. STRUT AND A-FRAME HINGE BOLTS Inspect for cracks and security of
attachment.
9. LANDING GEAR TORQUE KNEES Inspect
for
cracks, attachment and
corrosion. Aircraft without Kit No. 58-8003-1 installed
inspect in accordance
with the directions provided in Service Bulletin Number 2147.
I.
NOSE GEAR MECH INSP
1. WHEEL AND TIRE Check wheel for cracks and tire for
wear,
damage,
condition and proper inflation. Check wheel bearings for condition and
wear.
2.
LANDING GEAR STRUT Inspect the shock
strut
and
components
for
cracks, attachment, proper inflation and evidence of leakage.
3.
ACTUATING LINKAGE Check for
wear
at
attach points. Check for cracks
and security.
4.
GEAR DOORS AND LINKAGE Check doors for
damage and cracks
to
the
structure
and skins. Check linkage for
wear
and cracks
at
the attach points.
Check for condition and security.
5.
NOSE GEAR STEERING LINKAGE Inspect linkages for tightness,
condition and security. Check linkage boots for condition.
6.
SHIMMY DAMPER Check for condition and attachment. Check attach
points for cracks. Check fluid level
as
outlined in Chapter 12-20-00 of this
Maintenance Manual.
7. STRUT FLUID LEVEL Check and maintain the proper
hydraulic fluid level
in the strut
as
outlined in Chapter 12-20-00
of this Maintenance Manual.
8.
STRUT AND A-FRAME HINGE BOLTS
Inspect
for
cracks, corrosion and
security of attachment.
9.
TAXI LIGHT
Check for security and operation.
Check for
a
cracked light
and replace if necessary.
n25
5-20-00
Jun
2 8 / 0 2 P a g e 213