Nacelles; Wings And Carry-Through Structure - Raytheon BEECH BARON 58P Maintenance Manual

Ral~heon
Aircraft
BEECH BARON 58P AND BARON 58TC MAINTENANCE MANUAL
100-HOUR INSPECTION (CONTINUED)
B. POWER PLANT (Continued)
MECH INSP
L R
30.
AIR CONDITIONER COMPRESSOR Check for
security
and attachment.
Check belt for tension and
worn or
frayed
condition.
31. INDUCTION AIR FILTER Check for condition, cleanliness and security.
32.
INDUCTION SYSTEM AND ALTERNATE AIR Check flexible air ducts for
delamination of the inner lining. Check the alternate air valve for
blockage,
security, cracks, operation and
wear.
33.
FUEL INJECTION CONTROL VALVE Clean the
screen
and check for
damage. Install
screen
and check for leaks.
34. FUEL INJECTION SYSTEM Inspect all fuel injection
components,
iines
and fittings for evidence of fuel leaks, fraying and cracking.
35.
TURBOCHARGERS AND AIR OIL SEPARATORS
Inspect the
tu
rbocharger
system
for oil leaks and exhaust leaks. Check the compressor
wheel for nicks and cracks. Check linkages for security and proper
operation.
36.
INSTRUMENT AIR PRESSURE SYSTEM FILTERS Check
or
replace
each filter
as
outlined under the heading SERVICING in Chapter 36-00-00
of this Maintenance Manual.
37.
ELECTRIC PROPELLER DEICER Check for service
damage to
the deicer
heaters,
brush
rods, springs
and brushes. Check the lead
strap
and all other
clamps, connectors and
wiring
for electrical soundness. Check the
slip rings
for roughness, cracks, burned
or
discolored
areas
and for deposits of oil,
grease or
dirt. Check for security and attadhment of all
components.
Check
deicer boots for wrinkles, loose
or
torn
areas.
C. NACELLES
1. NACELLE SKIN
Check for deformation and obvious damage
or
cracks.
Check for loose
or
missing
rivets.
2.
NACELLE STRUCTURE Check for cracks and deformation. Check for
loose
or
missing rivets and concealed damage.
3.
PNEUMATIC PRESSURE REGULATORS Check for condition, security
and attachment.
4.
AIR CONDITIONER
CONDENSER Check for condition and attachment.
D.
WINGS AND CARRY-THROUGH STRUCTURE
1.
SKIN
Check for deformation and obvious damage. Check for cracks, loose
or
missing rivets. If damage is
found, check adjacent
structure.
Check for
indications of hard landing
or
excessive
flight loading.
2.
STRUCTURE Check for cracks, deformation and concealed damage.
Check for loose
or
missing
rivets.
3.
ACCESS DOORS AND PANELS
Inspect
for cracks, proper fit and
attachment.
n25
5-20-00
207