12.7
CUTTING UNIT SPECIFICATION_________________________________________
Magna 250
Construction
Reel Length
762mm
Number of Knives
4 / 6 / 8
Reel Diameter
254mm
(New)
Minimum Reel
Diameter (Before
235mm
Replacement)
Height of Cut
12.7 - 61mm
Rear Roll
Height of Cut
Adjustment
Transmission
Maximum Reel
Speed at
Maximum Engine
rpm
NOTE
These cutting units are made to cut grass of maximum height 100mm down to the available height of cut range.
12.8
CUTTING PERFORMANCE _____________________________________________
68 cuts per metre at 12km/hr with 11 knife cylinders.
50 cuts per metre at 12km/hr with 8 knife cylinders.
37 cuts per metre at 12km/hr with 6 knife cylinders.
25 cuts per metre at 12km/hr with 4 knife cylinders.
3.78 hectares/hr.at 12km/hr. (9.3 acres/hr at 7.5 mph)
10% allowance is included for normal overlaps and turning at the end of each cut.
Sport 200 Fixed
Heavy duty welded pressed steel construction
762mm
4 / 6 / 8
197mm
179mm
Standard Blade 12.7 - 37.5mm
Thin Blade 9.0 - 32.0mm
76mm Diameter
Adjustable screw system on rear roll
By direct drive through splined hydraulic motor to splined reel.
SPECIFICATIONS 12
Sport 200 Floating
762mm
4 / 6 / 8 / 11
197mm
179mm
Standard Blade 12.7 - 37.5mm
Thin Blade 9.0 - 32.0mm
High Height Kit 12.7 - 61.0mm
1240rpm
Verticut
762mm
48
N/A
N/A
3mm above
Ground
en-109