Table of Contents
Advertisement
7 ADJUSTMENTS
1
7.1 GENERAL PRECAUTIONS ______________________________________________
Before you clean, adjust or repair this equipment, push cutter switch to the OFF position, lower front and rear
cutting units to the ground, turn on the parking brake switch, stop the engine and remove the key.
Make sure the mower is parked on a solid and level surface. Never work on a mower that is lifted only by the
jack. Always use the jack stands.
A qualified technician must always do adjustments and maintenance. If the correct adjustments can not be made,
contact your Ransomes Jacobsen Dealer.
Inspect the equipment according to the maintenance schedule and keep complete records.
a
Keep the equipment clean.
b
Keep all moving parts correctly adjusted and lubricated.
c
Replace worn or damaged parts before you operate the mower.
d
Keep all fluids at the correct level.
e
Keep the shields in position and all hardware tight.
f
Keep the tyres correctly inflated.
When you make the adjustments or repairs, do not wear jewelry or loose fitting clothing.
Refer to the illustrations in the Parts Manual for the removal and assembly of parts.
When you discard hazardous materials (batteries, lubricants, fuel, anti-freeze), follow your local, state or federal-
recommended procedures.
en-56
WARNING
Advertisement
Table of Contents
