Table of Contents
Advertisement
5.2.Z.6
THE ENGINE WILL NOT START ____________________________________
When the ignition key is turned to the start position this screen is shown. If any of the
following flash.
•
The parking brake is not applied.
•
The cutter switch is not in the OFF position.
•
The foot pedal is not in the Neutral position.
•
The operator is not in the seat.
Note. The red LED's either side of the display will also flash.
The engine will not start until all the items in the list are correct
5.2.Z.7
BRIGHTNESS / CONTRAST SELECT _______________________________
To change the Brightness or the
5.2.Z.8
BRIGHTNESS / CONTRAST ADJUST _______________________________
Use the buttons below the + and - icons on the screen to increase and decrease the
brightness and contrast.
Contrast is model dependent.
5.2.Z.9
TIME DISPLAY OPTION __________________________________________
This display
this displays the time and engine hours.
This display
shows the date and engine hours.
Button 2 toggles between the two options.
Contrast,
press the button below the
NOTICE
5 CONTROLS
icon.
Br i g h t n e s s / C on t r a s t
0
+
MODE
100
0
100
%
%
-
-
+
MODE
en-27
Advertisement
Table of Contents
