Table of Contents
Advertisement
SAFETY 3
WARNING
Vibration exposure limits
Exposure limits are calculated as a combination of the vibration level (magnitude) of the tool and the
daily exposure time (trigger time). e.g. a product with 5m/s² vibration can be used up to 2 hours/day to
reach the EAV and up to 8 hours/day to reach the ELV.
Exposure action value (EAV) - daily vibration exposure a(8) = 2.5m/s²
Where daily vibration exposure a(8) is below 2.5m/s² the risk is relatively low and no action need be taken
exposure limit value (ELV) - daily vibration exposure a(8) = 5.0m/s²
If several tools are use the exposure values must be combined:
Total exposure is then the combined value of the activities
WARNING
Never mow if there is a risk of lightning or you hear thunder. if you are in the middle of mowing, stop in
a safe place, turn off the engine and go inside a building.
CAUTION
when you do any welding on the machine, the battery, controller and display must be disconnected before you
start. you must not open the controller. if the controller is opened, this can cancel all of the warranties and can
cause the failure of the machine.
CAUTION
personal protective equipment (PPE), for example safety glasses, leather work shoes or boots, a hard hat,
leather work gloves and ear protection must be used after the owner/user completes a local risk assessment of
the mower, to prevent injury.
Training in all manual operations must be given by an approved person before the machine is used the first
time.
en-15
Advertisement
Table of Contents
