5 CONTROLS
5.2.J
DPF SWITCH ______________________________________________________
With the switch in the center position (default) it allows automatic Active Regen.
Operation of the mower is not changed during Active Regen. See 8.15
When the Regen Request light flashes, press and release the front part of the switch to
start the Parked Regen cycle.
To prevent damage to the turf during Parked Regen, park the mower on concrete or
gravel. The engine must be warm, the traction pedal in NEUTRAL position, PTO switch
in OFF position and the parking brake engaged for the Parked Regen cycle to start.
Do not stop the engine, disengage the parking brake or drive the mower until the Regen
cycle is completed and the Regen Request light turns off. See 8.15
5.2.K TRANSPORT LOCK SWITCH ___________________________________________
Engages the wing unit locks for transport
The wing unit lock icon
is displayed on the visual display screen when engaged.
5.2.L
LIGHT SWITCH (OPTIONAL) ___________________________________________
Allows manual operation of the road lights.
Position 1. OFF
Position 2. Side / Marker Lights
Position 3. Dipped Beam.
Note, Position 3 needs the ignition in the ON position.
5.2.M
HAZARD WARNING SWITCH (OPTIONAL) _____________________________
Turns the four indicator lamps ON.
Push the front of the switch to turn ON
Push the rear of the switch to turn OFF
When the switch is turned on, the red lens flashes.
en-24