5 CONTROLS
5.2.Z.44
WARNING SOLENOID FAULT _____________________________________
When this screen is shown, there is a hydraulic circuit solenoid fault.
Go to i/o diagnostics for solenoid identification.
Press the button below the
5.2.Z.45
WARNING (TST) TILT SENSOR TECHNOLOGY FAULT ________________
When this screen is shown, there is a fault with the TST. Stop as soon as possible and
contact your service dealer
Press the button below the
5.2.Z.46
WARNING MAXIMUM SLOPE ANGLE EXCEEDED ____________________
When this screen is shown, the maximum-slope angle has been exceeded.
Press the button below the
en-38
to confirm the fault.
to confirm the fault.
to confirm the fault.
1
!
FAULT SOLENOID
1
™
!
1
0°
Slopes > = 25°
in either x or y