AMI BIOS
Default Setup
Select this option to automatically set your system configuration
Default
e
parameters. To select, highlight
and press
.
Original
This option loads the values that you saved before shutting off the
Original
system. The following prompt appears if you select
from
Yes
the Default Setup menu. Choose
to load the original values.
Optimal
Choose this option and the BIOS configures the system using the
best-case values to optimize system performance. However, these
values may not be applicable to your system. If your system does not
boot after choosing this setting, reconfigure it using the Fail-safe
settings. Refer to the following section.
Optimal
The screen below appears if you choose
from the Default
Yes
Setup menu. Select
to load the optimum values.
User's Guide
3-30