Events Control
This parameter monitors the following events and logs them into the
event log file if there is a change in status.
TEMPERATURE/VOLTAGE/FAN
Enable or disable the monitoring of the system
temperature,
volume, and CPU fan. The default is
.
Enabled
ECC
ECC or Error-Correcting Code tests the accuracy of data as it passes
in and out of memory. This parameter enables or disables the
monitoring of this function. The default is
.
Enabled
PCI
PCI or Peripheral Component Interconnect is a 32-bit bus that can run
at clock speeds of 33 MHz. This parameter monitors the activity of this
bus when set to enabled. The default is
Enabled.
I/O CHECK
Monitors the ISA for uncorrectable errors. This parameter monitors
the activity of this bus when set to enabled. The default is
Enabled.
Setup Utility
2-37