Installing A Simm - AOpen AP43 User Manual

Hardware Setup
The SIMM sockets accept any DRAM
combinations that satisfy the 128 MB
maximum memory.

Installing a SIMM

Observe
installing components.
Follow these steps to install a SIMM:
1. Slip a SIMM at a 45
facing down.
Be careful when inserting or removing
SIMMs.
socket can damage the socket or the
SIMM (or both).
2. Gently push the SIMM up until the pegs of the socket slip into the
holes on the SIMM and the holding clips lock the SIMM into a
vertical position.
The SIMM should be at a 90
installed.
2-18
the ESD precautions
o
angle into a socket with the component side
Forcing a SIMM in or out of a
when
o
angle when
User's Guide