Toro Reelmaster 6500-D Service Manual page 143

Toro Automated Control Electronicst Diagnostic Tools
Diagnostic ACEt Display
The diagnostic display is connected to the wiring
harness connector located inside the control console to
help the user verfiy correct electrical functions of the ma-
chine (Fig. 3 and 4).
ACE Display (Toro Part No. 85-4750)
Note: ACE diagnostic display overlays may vary with
specific unit model and serial numbers. Always use the
overlay(s) supplied with your RM 6500-D/6700-D.
Replacement English overlays, and overlays in Dutch,
Finish, German, French,
Norwegian, Polish, Spanish, and Swedish are available.
Refer to the specific RM 6500-D & 6700-D Parts
Catalog.
Data Logt System
The data log system controller is connected to the wiring
harness connector near the electronic controller. This
device can record machine data while it is in operation
to help your Toro Distributor diagnose intermittent
problems.
Contact you local authorized Toro distributor for infor-
mation on obtaining this service or device.
Reelmaster 6500-D/6700-D
Danish, Japanese,
Page 5 - 3
Overlay
Diagnostic
ACE Display
Figure 3
Figure 4
Figure 5
Electrical System (Rev. C)