Table of Contents
Advertisement
Product Overview
1
7
1. Side discharge chute
2. Engine
3. Gas tank
4. Controls
Controls
Become familiar with all the controls (Figure 5) before
you start the engine and operate the machine.
1. Ignition switch
2. Left motion control lever
3. Throttle control
4. Hour meter
5. Fuel tank
4
3
2
6
Figure 4
5. Parking brake
6. Mower deck
7. Front caster wheel
Figure 5
6. Choke
7. Neutral lock position for
right motion control lever
8. Right motion control lever
9. blade control switch (PTO)
10. Operator manual tube
Hour Meter
The hour meter records the number of hours the engine
has operated. It operates when the engine is running.
Use these times for scheduling regular maintenance
(Figure 6).
Safety Interlock Indicators
There are symbols on the hour meter and indicate with
5
a black triangle that the interlock component is in the
correct position (Figure 6).
Battery Indicator Light
When the ignition key is initially turned to the On
position, the battery voltage will be displayed in the area
where the hours are normally displayed.
g014654
The battery light turns on when the ignition is turned
on and when the charge is below the correct operating
level (Figure 6).
1. Safety interlock symbols
2. Battery light
Throttle Control
The throttle control has two positions: Fast and Slow.
Choke
Use the choke to start a cold engine.
Blade Control Switch (PTO)
The blade control switch (PTO) is used to engage
the electric clutch to drive the mower blades with the
right side motion control lever in the center, un-locked
position. Pull the switch up to engage the blades and
release. To disengage the blades, push the blade control
switch (PTO) down or move or release the right side
motion control lever into the neutral lock position.
12
Figure 6
3. Hour meter
Advertisement
Table of Contents
