Table of Contents
Advertisement
Utility Mode - Input Accounts
Touch Panel Display
Input Accounts
TX2
TSI
Output
TX Report
Report Screen
Max. Print Page
Initial Settings
ID
TSI
Self-ID
Self-telephone
#1, 2
Line
Line Type (1), (2) Two types of telephone line.
PSTN/Ext Switch
1, 2
Setting (The default is
Administrator registers each account (a department or an indi-
vidual user) with the system.
Select whether or not to put TSI on the transmitted document.
On The Doc.
Select the print condition for reports used to verify the results of
FAX transmission.
Output ON
Select whether to print on the status report a copy of the trans-
mitted document image.
ON
Limit the number of pages to be printed for each account in the
rang.
The initial or default settings for FAX.
The TSI information can be programmed when you notify name
to the destination.
Name and FAX number are programmed as the ID in advance.
Telephone (FAX) number can be programmed
"Self-telephone #" is displayed only if the optional G3 MULTI-
PORT SERIES in not mounted.
DP20
"Line Type" is displayed only if the optional G3 MULTIPORT
SERIES in not mounted.
Setting can be made for use of this machine over an ordinary
subscriber line connected via a PBX.(private branch exchange)
Extension
"PSTN/Ext Switch" is displayed only if the optional G3 MULTI-
PORT SERIES in not mounted.
S-9
Highlighted
Out Of Doc.
Output OFF
If TX Fail
OFF
0 to 99999 P.
DP10
PSTN
).
OFF
PB
Advertisement
Table of Contents
