List Of Soft Switches - Minolta Di251f Service Manual

7-2.

List of Soft Switches

The tables below describe the soft switches of this system.
The highlighted areas are the initial settings.
Note
• The mark (*) indicates a mode containing items that can be set according to the user's
choice, for example.
• The feature with [**] (bit 1) is available only in a system with a multi-port option.
MODE 000 Factory setting bit : 0 0 1 1 0 0 0 0 (Hex : 30)
Bit Feature
7 Stamping default of
TX mark.
6 Select position of TX
marker.
5 Default addition of TSI.
4 Select position of TSI.
3 Specifies default
confirming group
password.
2 Confirm group password
at RX.
1 Transmission form
default
0 E-mail sender's name.
Logic Meaning
0 OFF
*
1 Yes
0 Leading & trailing
* edges of doc.
1 Only trailing edge
of doc.
0
*
1 Yes
0 Outside doc.
*
1 Inside doc.
0
1 Yes
*
0
*
1 Yes
0 Memory-stored
1 Non-stored
*
0 Same as TSI
*
1
S-33
Specifies whether TX
marker is returned to ON or
OFF after completing opera-
tions.
No Specifies whether printing
TSI on transmitted docu-
ment is returned to ON or
OFF after completing opera-
tions.
No Specifies whether confirm-
ing group password at TX is
returned to ON or OFF after
completing operations.
No
Specifies which TX method
is returned to ON, memory-
stored TX or nonstorage TX
after completing operations.
No
Description