Function; System Input - Minolta Di251f Service Manual

(3)

Function

• This function allows the Tech. Rep. to make the various function tests and adjustments.
Tech. Rep. Mode - Function
Touch Panel Display
F7-2
(4)

System Input

• The function allows the Tech. Rep. to define the paper size input, and make settings.
Tech. Rep. Mode - System Input
Touch Panel Display
Machine Configuration
<How to confirm the add-on memory capacity>
• When you add a memory card, ROT (8 MB or 16 MB), the system indicates "8.3 MB" of
the rotary memory.
• If you add a ROT with the rotational memory of 8.3 MB, the image memory capacity is
increased by 8 MB or 16MB and the system indicates "8 MB" or "16 MB", respectively.
• If you add a TMEM, the image memory of 32 MB is added and the system indicates "32
MB".
• If you add a ENU, the work memory of 12 MB is added and the system indicates "16 MB".
<Original Size Detecting Sensor Adjustment for FAX Mode>
Automatically adjusts the threshold level of the Original Size Detect-
ing Sensor.
<Adjustment Procedure>
1. Stack five sheets of blank A3 or 11×17 paper on the Original
Glass and lower the Original Cover.
2. Call the Tech. Rep. Mode to the screen.
3. Touch "Function" to display the Function menu.
4. Touch "F7-2".
5. Press the Start key to run the Original Size Detecting Sensor
Adjustment function.
6. Turn OFF and ON the Power Switch.
NOTE
• The Start key remains lit up orange while this function is being
run and lights up green as soon as the sequence is completed.
Displays the machine configuration status.
S-19
Description
Description