Minolta Di251f Service Manual page 145

MODE 424 Factory setting bit : 0 0 0 1 1 0 0 0 (Hex : 18)
Bit Feature
7 Auto paper
configuration. (Copy)
65 Select FLS size.
(Copy)
4 Copy mode limit.
(copy)
3 "Small" originals.
(Copy)
2 Function limit.
(Copy)
1 Non-standard size origi-
nal processing when
ADFR and A4/Letter
paper are selected.
(copy)
0
MODE 425 Factory setting bit : 0 0 0 0 0 0 0 0 (Hex : 00)
Bit Feature
7654
3210 Image quality mode
adjustment.
(copy)
Logic Meaning
0 Mixed
1 Limited
×
00 210 330
203 × 330
01
216 × 330
10
220 × 330
11
0 Yes
1 No
0 Copy disabled Sets whether to enable copying
1 Copy
enabled
0 No
1 Yes
0 Process
1 Do not
process
0 Fixed to "0"
Logic Meaning
0000 Fixed to "0000"
0000

1000
Others Not available
S-101
Description
Specifies whether document
sizes will be rounded off for the
system specification in auto
paper mode.
Setting of sizes handled as FLS.
Sets whether or not to inhibit
setting of "two-sided copy" in the
priority copy mode.
or emit an alarm when an
original that is smaller than the
minimum detectable size is
loaded.
Sets whether or not to disable
the settings of some of the copy
mode functions (application,
original copy).
Setting when truncated A4T
original (short dimension about
210 mm, long dimension about
250 mm) is copied using ADFR.
Description
Setting of image density for
printing.
Enables setting of special
image quality mode for
Original Image Type of
MODE 409 Bit4-1.