Report - Minolta Di251f Service Manual

Maintenance Mode
Touch Panel Display
File Dump
Soft Switch set
Touch Panel Adj.
(2)

Report

• This report can be output only in the Maintenance Mode.
Utility Mode - Report
Touch Panel Display
Report 1
Protocol Trace
Service Call Report
This outputs a report on the RAM data of MAIN-CPU by specifying
its file name.
• Procedure
1. Press the Warm Restart switch.
2. Enter the Maintenance Mode.
3. Touch "File Dump".
4. Type the file name and then touch "Enter". It should be typed in
the alphanumeric code (0-9, A-Z).
(For typing the file name, refer the input method of the destina-
tion of one-touch dialing.)
5. File dumping will be started and returns to the standby mode.
See "Soft Switch Set" on page S-21.
This mode is adjust the position of the touch panel.
• Procedure
1. Enter the Maintenance Mode.
2. Touch "Touch Panel Adj".
3. Touch "+" at the upper left corner. Touch the next "+" following
the arrow symbol on screen in a clockwise direction. Repeat
this step for all 4 corners.
Push the center of each "+" with a fine soft felt pen.
4. The touch panel returns the maintenance mode.
Each communication processes information on a protocol trace.
Service Call Report is output with the manually.
S-24
Description
Description