Table of Contents
Advertisement
2.
WARM RESTART
2-1.
Overview
• Use the warm restart function when you run the maintenance mode or you cannot use
the switches on the control panel due to some error (in the transmission, the reception, or
the copy modes).
If you push the warm restart button, the status of the machine will be initialized. However,
the document and the data stored in the internal memory are maintained. After initializing
the machine, start processing the stored document (except a copied document and PC
print document).
2-2.
How to Operate Warm Restart
• Press the switch inside the small hole that is located on the side of the control panel.
2-3.
Warm Restart Steps
• Activate warm restart by pushing the switch described in 2-2.
At this moment, all displays on the panel will disappeared.
After about 5 seconds later, warm restart is completed and the initial screen of the panel
will be displayed. After this initialization, start processing the stored document.
Control Pane
Pause
FAX/Scan
Extra Scan
4015S501CA
Use a pin to push the button inside
small hole that is located on the side.
T-18
Advertisement
Table of Contents
