Minolta Di251f Service Manual page 149

1-2. Communication Error Codes
(1) Errors in operations
Code Description
00 • Received DIS but no
document in local ter-
minal
• Polling Reception is
requested
• Software failure at
time of connection
01 • Document pulled out
while transmitting.
• Document size was
too small
• Illegal dialing opera-
02
tion
(Example; dialing
or # with DP setting)
• Mismatched TX pass-
03
word
• Mismatched RX pass-
04
word
• Mismatched pass-
05
word while polling
• Remote system has
06
no relay function
• Remote system has
07
not confidential com-
munication function
Cause - Re: Remote, Li: Line, Lo: Local
Cause
Error in operation
Error in operation at
remote end
Error in operation
Error in setting up
Error in registration
Sender's password
and receiver's are
not matched.
Sender's password
and receiver's are
not matched.
Incorrect password
was entered for set-
ting up polling.
Failure in remote
machine
Failure in remote
machine
T-2
Re Li Lo
Reload a document
and retry TX.
Ask to reload a doc-
ument and retry TX.
Reload a correct
document and retry
TX.
Check the soft
switch (MODE 006
Bit5 & MODE 011
Bit 5).
Check the regis-
tered one-touch
dialing number.
Check the group
password of both
sides.
Check the group
password of both
sides.
Check the status of
the remote machine
and the local pass-
word.
Check the status of
the remote machine.
Check the status of
the remote machine.
Remedy