Settings In The Maintenance Mode; Maintenance Mode - Minolta Di251f Service Manual

4-3.

Settings in the Maintenance Mode

(1)

Maintenance Mode

• This mode displays data on screen and reports. It is possible to carry out routine opera-
tions.
Maintenance Mode
Touch Panel Display
Mem. Contents
Memory Dump
File Display
This displays the RAM data of MAIN-CPU on the LCD by specifying
its absolute address which will be provided by our technical depart-
ment.
• Procedure
1. Press the Warm Restart switch.
2. Enter the Maintenance Mode.
3. Touch "Mem. Contents".
4. Input the address with the 10-key pad or the touch keys and
then touch "Enter". It should be typed in the HEX code (0-9, A,
B, C, D, E, F)
5. Touch " ↑ " or " ↓ " to change the address.
6. Touch "Enter" twice to return to the maintenance mode.
This outputs a report on the RAM data of MAIN-CPU by specifying
its absolute address which will be provided by our technical depart-
ment.
• Procedure
1. Press the Warm Restart switch.
2. Enter the Maintenance Mode.
3. Touch "Memory Dump".
4. Input the address with the 10-key pad or the touch keys and
then touch "Enter". It should be typed in the HEX code (0-9, A,
B, C, D, E, F)
5. Touch "Length".
6. Input the length with the 10-key pad or the touch keys and then
touch "Enter". It should be typed in the HEX code (0-9, A, B, C,
D, E, F).
7. Touch "Enter" to return to the standby mode.
This displays the RAM data of MAIN-CPU on the LCD by specifying
its file name.
• Procedure
1. Press the Warm Restart switch.
2. Enter the Maintenance Mode.
3. Touch "File Display".
4. Type the file name and then touch [Enter]. It should be typed in
the alphanumeric code (0-9, A-Z).
(For typing the file name, refer to the input method of the desti-
nation of one-touch dialing.)
5. Touch [ ↑ ]or [ ↓ ] to change the displayed address.
( ↓ : beginning display address + 30H.)
6. Touch [Enter] to return to the maintenance mode.
S-23
Description