Rack Mounting The Device - Enterasys Matrix E1 1G587-09 Installation Manual

Installation
Figure 3-9 Attaching the Strain-Relief Bracket
➀
Strain-relief bracket
3.7.3

Rack Mounting the Device

Proceed as follows to install the device into a 19-inch rack:
1. Attach the rackmount brackets
M4 x 6 mm flathead screws
Figure 3-10 Attaching the Rackmount Brackets
Á À
➀
Rackmount brackets
2. With the mounting brackets attached, position the device between the vertical frame members
➀
of the 19-inch rack as shown in
using four mounting screws
3-18 Hardware Installation
Á
À
➁
M4 x 6 mm pan-head screws
➀
to the device, as shown in
➁
shipped with the device.
➁
M4 x 6 mm flathead screws
Figure 3-11. Then fasten the device securely to the frame
➁
(user supplied).
Figure 3-10, using the eight
À Á