Enterasys Matrix E1 1G587-09 Installation Manual page 24

1G582-09 or 1G587-09 (1G58x-09)
1G582-09 or 1G587-09 (1G58x-09)
The 1G58x-09 switching functions can be configured using the WebView™ application, CLI
switching commands, or SNMP.
The 1G58x-09 device can be installed as a tabletop unit or installed into a standard 19-inch rack
using the supplied rack mounting hardware.
The 1G58x-09 has two power supplies. If one power supply fails, the remaining power supply
assumes the entire load of the device without interruption to network traffic. Each power supply
module supports its own ac input connection, which enables each power supply to be connected to
a different ac power circuit for power source redundancy.
Figure 1-1 Matrix E1 1G582-09 and 1G587-09 Standalone Devices
 Á
 Á
➀
Power LED
➁
RJ45 console port
➂
Reset switch
➃
CPU LED
1-2 Introduction
à Ä
À
à Ä
À
➄
Ethernet Expansion Module option slot 1
➅
Ethernet Expansion Module option slot 2
➆
Ethernet Expansion Module option slot 3
➇
1G582-09 - Six fixed, RJ45, 10/100/1000 Mbps Ethernet ports
1G587-09 - Six fixed, Mini-GBIC slots, 1000 Mbps Ethernet ports
Å
Ç
Å
Ç
Æ
Æ