HOW TO USE THIS GUIDE
For...
An overview of the 1G58x-09 features and
getting technical support from Enterasys
Networks
Network requirements that must be met
before installing the 1G58x-09
Instructions to install the 1G58x-09
hardware and optional interface cards
Diagnosing network/operational problems
using the LANVIEW LEDs
Specifications, environmental requirements,
and physical properties of the 1G58x-09, the
optional Ethernet expansion modules, GBIC
and Mini-GBIC cards
Instructions to set the mode switches when
necessary
RELATED DOCUMENTS
The manuals listed below can be obtained from the World Wide Web in Adobe Acrobat Portable
Document Format (PDF) at the following site:
http://www.enterasys.com/support/manuals
•
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide provides information
concerning use of the Command Line Interface to set up and manage the 1G58x-09.
•
Cabling Guide provides information on dB loss and cable specifications.
Unlike the Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide, the Cabling
Guide is not listed alphabetically on the web site. Instead, it is listed under the Overview
Guides link.
Refer to...
Chapter 1,
Introduction
Chapter 2,
Network Requirements
Chapter 3,
Hardware Installation
Chapter 4,
Troubleshooting
Appendix A,
Specifications
Appendix B,
Optional Installations and
Mode Switch Bank Settings
How to Use This Guide
About This Guide
xix