Gpim Physical Properties; Console Port Pinout Assignments - Enterasys Matrix E1 1G587-09 Installation Manual

Table A-19 GPIM-09 Operating Range
Item
62.5 µm MMF
50 µm MMF
50 µm MMF
10 µm SMF
* To obtain the distance of 550 m for the GBIC-09 using multimode fiber, Launch Mode Conditioning cable
must be used. Refer to
A.4.4

GPIM Physical Properties

Dimensions
Approximate Weight (Unit)
A.5

CONSOLE PORT PINOUT ASSIGNMENTS

The Console port is a serial communications port that supports local management of the 1G58x-09.
Refer to Table A-20
Table A-20 Console Port Pin Assignments
Pin Signal Name
1 Transmit Data (XMT)
2 Data Carrier Detect (DCD)
3 Data Set Ready (DSR)
4 Receive Data (RCV)
5 Signal Ground (GND)
6 Data Terminal Ready (DTR)
7 Request to Send (RTS)
8 Clear to Send (CTS)
Section 3.8.3 for details.
1.2 H x 3.4 W x 6.5 D (cm)
0.47 H x 1.34 W x 2.56 D (in.)
25 g (0.88 oz)
for the Console port pin assignments.
Modal Bandwidth @
1300 nm
500 MHz/km
400 MHz/km
500 MHz/km
N/A
Console Port Pinout Assignments
Range
2-550 Meters*
2-550 Meters*
2-550 Meters*
2-10,000 Meters
Input/Output
Output
Output
Input
Input
NA
Output
Input
NA
Specifications A-11