Setting Community Names In The Console - HP 10Base-T Hub 24M Manual

Configuration Reference
Figure 6-17. The Community List Screen

Setting Community Names in the Console

To set Community Names for the hub, using the Hub Console, perform the
following tasks:
1.
2.
To add a Community Name, perform the following steps:
1.
6-38
From the Main Menu, type 2 and press [Enter]. The Hub Console
Interface displays the Management Access Configuration Menu.
From the Management Access Configuration Menu, type 2 and press
[Enter]. The Hub Console Interface displays the Community List
Screen. The Community List comes with a preset Community Name,
Public that provides manager level access.
Type A and press [Enter]. The Community List Screen displays the
following prompt:
Enter in community name:
Unlike most SNMP
management programs,
the HP Hub Console
enables you to control
the different levels of
access for BOTH Read
and Write privileges for
a device.