Responding To An Enter Username Prompt - HP 10Base-T Hub 24M Manual

Responding to an Enter username prompt

If the interface displays an Enter username prompt, you need to provide
proper device access strings to reach the Command Prompt (=>). To reach
the Command Prompt, perform the following steps:
1. Type in the string required at the Enter username prompt and press
[Enter]. The console displays a Password prompt. If you typed the wrong
user name, the interface displays the following message:
Check to see if you have typed the username incorrectly. If you have typed
it correctly, check with your network administrator to see if you are using
the proper username. The interface allows for three retries before discon-
necting.
2. Type in the password string required at the Password prompt. Note that,
when entered, the password string is not displayed on the screen for
security reasons. If you typed the wrong password string, the interface
displays the following message:
Check to see if you have typed the username and password incorrectly.
• If you have typed these strings incorrectly, check with your network
administrator to see if you are using the proper password. The inter-
face allows three retries before disconnecting.
• If you typed these strings correctly, the interface displays a => prompt
as shown in figure 2-3.
Username incorrect
Password incorrect
Running the Hub Console
2-9