Ip Configuration - HP 10Base-T Hub 24M Manual

Configuration Reference
Attribute
Screen Name
Menu
Function
Common Use
Browser Interface Window
Browser Interface Tab
Default Setting
The IP Configuration Screen enables you to change existing values for an IP
Address, a subnet mask, and (optionally) the gateway address for the hub so
that it can be managed in an IP network. It also enables you to access the hub
via HP AdvanceStack Assistant and the Browser Interface.
You can configure the IP Address manually or direct the agent on the hub to
retrieve an available address, using the BOOTP/DHCP facility. The IP Config-
uration Screen contains the following columns of information that indicate
information about IP configuration for your hub.
6-32

IP Configuration

Description
IP Configuration
--
Enables you to configure an IP Address, a subnet mask, and
the gateway address for the hub so that it can be managed
in an IP network.
Creating an IP Address for the hub.
IP Configuration
Configuration
Bootp/DHCP
IP Config. Indicates whether the IP Address is configured manually or
automatically. The settings are:
Manual. Indicates you have set the hub's IP configuration manually.
Bootp/DHCP. Indicates the hub's IP configuration was set automati-
cally using BOOTP or DHCP.
IP Address. Indicates the IP Address assigned to the hub. The IP Address,
or Internet Protocol address, is the network layer address of a device
assigned by the administrator of an IP network. A sample IP Address is
16.39.2.140. Each of the fields in the address can be 1 through 32 in binary
or 0 through 255 decimal.