HP 10Base-T Hub 24M Manual page 23

Running the Hub Console
.
Figure 2-3. A Password Issuing Session
N o t e
If you cannot retrieve either the hub's username or password, you can remove
it by pressing and holding the Clear button on the hub for 10 seconds. Once
you have removed the password, you can issue commands in the Command
Prompt region or enter the hub's console interface Menu System.
If you want to change your password and username, go to the Password option
under the Management Access Configuration Menu. For details on process,
see the reference page in Chapter 6 of this guide for Passwords.
2-10