Figure 6-36. The Backup Links Screen
Setting Backup Links in the Hub Console
To set Backup Links from the Hub Console Interface, perform the following
steps:
From the Main Menu, type 3 and press [Enter]. The Hub Console
1.
Interface displays the Hub Configuration Menu.
From the Hub Configuration Menu, type 4 and press [Enter]. The
2.
Hub Console Interface displays the Backup Links Configuration Screen.
In this example, backup
port 4 has become the
active port for failed
port 1 while primary
port 2 is active and
healthy and has not had
to use backup port 10.
Configuration Reference
6-83