Setting Authorized Managers In The Console - HP 10Base-T Hub 24M Manual

Configuration Reference
Figure 6-19. The Authorized Managers Screen

Setting Authorized Managers in the Console

To set authorized managers for the hub, perform the following tasks:
1.
2.
To Add an Authorized Manager, perform the following tasks:
1.
2.
6-42
From the Main Menu, type 2. The Hub Console Interface displays the
Management Configuration Access Menu.
From the Management Configuration Access Menu, type 3. The Hub
Console Interface displays the Authorized Managers Screen.
Type A and press [Enter]. The Hub Console Interface displays a
numbered list of all available Community Names and the following
prompt:
Select community for manager (1-#)
Type the number of the Community Name you want to assign the autho-
rized manager and press [Enter]. The Hub Console Interface
displays the following prompt:
Enter in Manager IP Address
Both the Community
Name (access level)
and IP Address of the
authorized manager are
shown to identify both
who the manager is and
what level of control
they have.