Changing Hub System Information In The Console - HP 10Base-T Hub 24M Manual

Figure 6-27. The Hub System Information Screen

Changing Hub System Information in the Console

To change hub system information from the Hub Console, perform the
following steps:
From the Main Menu, type 3 and press [Enter]. The Hub Console
1.
Interface displays the Hub Configuration Menu.
From the Hub Configuration Menu, type 1 and press [Enter]. The
2.
Hub Console Interface displays the Hub System Information Screen.
From the Hub System Information Screen, type Y and press [Enter]
3.
to enter or change system parameters. The Hub Console Interface displays
the following prompt:
Change the system (N)ame, (C)ontact, (L)ocation?
Configuration Reference
Information you can
change is System
Name, System Contact,
and System Location.
6-61