HP 10Base-T Hub 24M Manual page 46

The Alert Control Bar
The Alert Control Bar appears at the bottom of the Alert Log and contains
buttons that enable you to manage the Overview Window.
Figure 4-9. The Alert Control Bar
The buttons are detailed here.
Refresh Button. Displays new alerts that have occurred since you
opened this window. Note new faults are automatically clocked to every
15 seconds.
Acknowledge Selected Events Button. Removes the New symbol from
the entry. This feature is useful if you have more than one system admin-
istrator working on problems. It shows that someone has looked at it. The
Status Bar will no longer consider it a fault needing to be displayed.
If an alert has not been acknowledged, the New label appears in the Status
column to the left of the Status Indicator.
Once the alert has been acknowledged, the label is removed.
Delete Selected Events Button. Removes an alert from the Alert Log.
Running the Browser Interface
4-15