HP 10Base-T Hub 24M Manual page 125

Configuration Reference
4.
5.
6-68
Type a number and press [Enter]. You can enter port numbers in
the following fashion:
• a discrete number, for example, 5
• multiple discrete numbers, separating each with a comma, for
example, 3, 11, 19
• a range of port numbers, using a dash, for example, 3-6
• both a discrete number and a range of numbers separated by a
comma, for example, 3-6, 9
• multiple ran ges of numbers separated by a comma, for example, 3-6,
19-21
• X or XCVR can be inserted in any of the above conventions to indicate
the XCVR port.
The console displays the following prompt:
Configure Port as (D)isabled or (E)nabled:
Type E to enable the port or D to disable it and press [Enter].
The console displays the hub graphic with the new port status.