Hub System Information - HP 10Base-T Hub 24M Manual

Configuration Reference
Attribute
Screen Name
Menu
Function
Common Use
Browser Interface Window
Browser Interface Tab
Defaults
The General System Information Screen displays hub system identification
information retrieved from the System Group in the MIB II. It also enables you
to change System Name, System Contact, and System Location strings. The
information shown in the General System Information Screen is detailed here.
6-58

Hub System Information

Description
Hub System Information
Hub Configuration
Displays a list of all menus and top-level options available
from the console.
Launching any second-level menu available from the
console.
Identity
Identity
• Port Status: Not active
• Link Status: Not detected
• Last Heard Source Address: None
• Security Information: No violation
System Name. A label used to associate a common name to identify the
device. This can be up to 255 characters, including spaces. For example,
My Hub.
System Contact. The name of the person responsible for or who admin-
isters the device.
System Location. A description of where the device will be located. This
can be up to 255 characters, including spaces. For example, Wiring
Closet -- East.
Download Version. The versions of ROM and firmware of the device. A
sample ROM version is X.P1.00. A sample firmware version is A.0.02.
System Up Time. The amount of time elapsed since the device was
powered on. Displayed in the format DD:HH:MM:SS where D is days, H
is hours, M is minutes, and S is seconds. For example, 73:43:50.
Device Fault. Indicates errors discovered during the device self test.
Only shown in the console.