HP 10Base-T Hub 24M Manual page 132

4. From the Address Selection list box, select the Address Selection method
you want to use. The options are:
• continuous
• first heard
• assigned
For more detail on these address selection methods, see the discussion
on address selection methods at the beginning of this section.
5. If you selected the Assigned address selection method, in the Authorized
Address box, type the MAC address of the device you want to permit to
communicate with the current port.
6. From the Prevent Eavesdropping list box, select the appropriate setting
for this feature. The settings are:
Yes. Directs the hub to block transmission of packets not directed to
the device connected on that port.
No. Directs the hub to transmit packets to all devices.
7. From the Send Alarm list box, select the appropriate setting for this
feature. The settings are:
Yes. Directs the hub to send an alarm to one of the logs detailed in the
table earlier in the section:
No. Directs the hub to not generate an alarm.
Configuration Reference
6-75