Table of Contents
Advertisement
If you click Static DHCP Configuration in the Static DHCP screen or the Edit icon next to a static DHCP
entry, the following screen displays.
Figure 48 Static DHCP: Static DHCP Configuration/Edit
The following table describes the labels in this screen.
Table 26 Static DHCP: Static DHCP Configuration/Edit
LABEL
Active
Group Name
IP Type
Select Device Info
MAC Address
IP Address
OK
Cancel
8.4 The UPnP Screen
Universal Plug and Play (UPnP) is a distributed, open networking standard that uses TCP/IP for simple
peer-to-peer network connectivity between devices. A UPnP device can dynamically join a network,
obtain an IP address, convey its capabilities and learn about other devices on the network. In turn, a
device can leave a network smoothly and automatically when it is no longer in use.
See
page 101
Chapter 8 Home Networking
DESCRIPTION
Select this to activate the connection between the client and the EMG.
Select the interface group name for which you want to configure static DHCP settings. See
Chapter 15 on page 179
This field displays IPv4 for the type of the DHCP IP address. At the time of writing, it is not
allowed to select other type.
Select a device or computer from the drop-down list or select Manual Input to manually enter
a device's MAC address and IP address in the following fields.
If you select Manual Input, enter the MAC address of a computer on your LAN.
If you select Manual Input, enter the IP address that you want to assign to the computer on
your LAN with the MAC address that you will also specify.
Click OK to save your changes.
Click Cancel to exit this screen without saving.
for more information on UPnP.
EMG6726/8726-B10A User's Guide
for how to create a new interface group.
107
Advertisement
Table of Contents
