ZyXEL Communications EMG8726-B10A User Manual page 300

• Router solicitation: A request from a host to locate a router that can act as the default router and
forward packets.
• Router advertisement: A response to a router solicitation or a periodical multicast advertisement from
a router to advertise its presence and other parameters.
IPv6 Cache
An IPv6 host is required to have a neighbor cache, destination cache, prefix list and default router list.
The EMG maintains and updates its IPv6 caches constantly using the information from response
messages. In IPv6, the EMG configures a link-local address automatically, and then sends a neighbor
solicitation message to check if the address is unique. If there is an address to be resolved or verified, the
EMG also sends out a neighbor solicitation message. When the EMG receives a neighbor advertisement
in response, it stores the neighbor's link-layer address in the neighbor cache. When the EMG uses a
router solicitation message to query for a router and receives a router advertisement message, it adds
the router's information to the neighbor cache, prefix list and destination cache. The EMG creates an
entry in the default router list cache if the router can be used as a default router.
When the EMG needs to send a packet, it first consults the destination cache to determine the next hop.
If there is no matching entry in the destination cache, the EMG uses the prefix list to determine whether
the destination address is on-link and can be reached directly without passing through a router. If the
address is unlink, the address is considered as the next hop. Otherwise, the EMG determines the next-
hop from the default router list or routing table. Once the next hop IP address is known, the EMG looks
into the neighbor cache to get the link-layer address and sends the packet when the neighbor is
reachable. If the EMG cannot find an entry in the neighbor cache or the state for the neighbor is not
reachable, it starts the address resolution process. This helps reduce the number of IPv6 solicitation and
advertisement messages.
Multicast Listener Discovery
The Multicast Listener Discovery (MLD) protocol (defined in RFC 2710) is derived from IPv4's Internet
Group Management Protocol version 2 (IGMPv2). MLD uses ICMPv6 message types, rather than IGMP
message types. MLDv1 is equivalent to IGMPv2 and MLDv2 is equivalent to IGMPv3.
MLD allows an IPv6 switch or router to discover the presence of MLD listeners who wish to receive
multicast packets and the IP addresses of multicast groups the hosts want to join on its network.
MLD snooping and MLD proxy are analogous to IGMP snooping and IGMP proxy in IPv4.
MLD filtering controls which multicast groups a port can join.
MLD Messages
A multicast router or switch periodically sends general queries to MLD hosts to update the multicast
forwarding table. When an MLD host wants to join a multicast group, it sends an MLD Report message
for that address.
An MLD Done message is equivalent to an IGMP Leave message. When an MLD host wants to leave a
multicast group, it can send a Done message to the router or switch. The router or switch then sends a
group-specific query to the port on which the Done message is received to determine if other devices
connected to this port should remain in the group.
Appendix C IPv6
EMG6726/8726-B10A User's Guide
300