ZyXEL Communications EMG8726-B10A User Manual page 31

Table 7 Navigation Panel Summary (continued)
LINK TAB
QoS General
Queue Setup
Classification
Setup
Shaper Setup
Policer Setup
Monitor
NAT Port Forwarding
Applications
Port Triggering
DMZ
ALG
Address Mapping Use this screen to change your EMG's address mapping settings.
Sessions
DNS DNS Entry
Dynamic DNS
IGMP/MLD IGMP/MLD
Vlan Group Vlan Group
Interface Interface
Grouping
Grouping
Home ONE Connect
Connectivity
Security
Firewall General
Protocol
Access Control
DoS
MAC Filter MAC Filter
Parental Parental Control
Control
Scheduler Rule Scheduler Rule
Certificates Local Certificates
Trusted CA
VoIP (for EMG8726-B10A)
Chapter 2 The Web Configurator
FUNCTION
Use this screen to enable QoS and traffic prioritizing. You can also
configure the QoS rules and actions.
Use this screen to configure QoS queues.
Use this screen to define a classifier.
Use this screen to limit outgoing traffic rate on the selected interface.
Use this screen to configure QoS policers.
Use this screen to view statistics of QoS on WAN/LAN interface and the
status of queues.
Use this screen to make your local servers visible to the outside world.
Use this screen to configure servers behind the EMG.
Use this screen to change your EMG's port triggering settings.
Use this screen to configure a default server which receives packets from
ports that are not specified in the Port Forwarding screen.
Use this screen to enable or disable SIP ALG.
Use this screen to configure the maximum number of NAT sessions each
client host is allowed to have through the EMG.
Use this screen to view and configure DNS routes.
Use this screen to allow a static hostname alias for a dynamic IP address.
Use this screen to configure multicast settings (IGMP for IPv4 and MLD for
IPv6 multicast groups) on the WAN.
Use this screen to group and tag VLAN IDs to outgoing traffic from the
specified interface.
Use this screen to map a port to a PVC or bridge group.
Use this screen to enable the one connect function on the EMG.
Use this screen to configure the security level of your firewall.
Use this screen to add Internet services and configure firewall rules.
Use this screen to enable specific traffic directions for network services.
Use this screen to activate protection against Denial of Service (DoS)
attacks.
Use this screen to block or allow traffic from devices of certain MAC
addresses to the EMG.
Use this screen to block web sites with the specific URL.
Use this screen to configure the days and times when a configured
restriction (such as parental control) is enforced.
Use this screen to view a summary list of certificates and manage
certificates and certification requests.
Use this screen to view and manage the list of the trusted CAs.
EMG6726/8726-B10A User's Guide
31