The Dns Route Add Screen - ZyXEL Communications EMG8726-B10A User Manual

Figure 76 Network Setting > Routing > DNS Route
The following table describes the labels in this screen.
Table 34 Network Setting > Routing > DNS Route
LABEL
Add New DNS
Route
#
Status
Domain Name
WAN Interface
Subnet Mask
Modify

9.3.1 The DNS Route Add Screen

You can manually add the EMG's DNS route entry. Click Add New DNS Route in the Network Setting >
Routing > DNS Route screen. The screen shown next appears.
Figure 77 DNS Route Add
Chapter 9 Routing
DESCRIPTION
Click this to add a new DNS route.
This is the index number of a DNS route.
This field displays whether the DNS route is active or not. A yellow bulb signifies that this DNS route
is active. A gray bulb signifies that this DNS route is not active.
This is the host name or domain name of the DNS route entry.
This is the WAN connection through which the EMG forwards DNS requests for this domain name.
This is the subnet mask of the DNS route entry.
Click the Edit icon to modify the DNS route.
Click the Delete icon to delete the DNS route.
EMG6726/8726-B10A User's Guide
129