Table 7 Navigation Panel Summary (continued)
LINK
TAB
SIP
SIP Account
SIP Service
Provider
Phone
Phone Device
Region
Call Rule
Speed Dial
System Monitor
Log
System Log
Security Log
Traffic Status
WAN
LAN
NAT
ARP table
ARP table
Routing Table
Routing Table
Multicast Status
IGMP Status
MLD Status
Maintenance
System
System
User Account
User Account
Remote
MGMT Services
Management
Trust Domain
Chapter 2 The Web Configurator
FUNCTION
Use this screen to set up information about your SIP account and
configure audio settings such as volume levels for the phones
connected to the VMG.
Use this screen to configure the SIP server information, QoS for VoIP calls,
the numbers for certain phone functions, and dialing plan.
Use this screen to view detailed information of the phone devices.
Use this screen to select your location and a call service mode.
Use this screen to configure speed dial for SIP phone numbers that you
call often.
Use this screen to view the status of events that occurred to the EMG.
You can export or e-mail the logs.
Use this screen to view all security related events. You can select level
and category of the security events in their proper drop-down list
window.
Levels include:
•
Emergency
•
Alert
•
Critical
•
Error
•
Warning
•
Notice
•
Informational
•
Debugging
Categories include:
•
Account
•
Attack
•
Firewall
•
MAC Filter
Use this screen to view the status of all network traffic going through the
WAN port of the EMG.
Use this screen to view the status of all network traffic going through the
LAN ports of the EMG.
Use this screen to view NAT statistics for connected hosts.
Use this screen to view the ARP table. It displays the IP and MAC address
of each DHCP connection.
Use this screen to view the routing table on the EMG.
Use this screen to view the status of all IGMP settings on the EMG.
Use this screen to view the status of all MLD settings on the EMG.
Use this screen to set Device name and Domain name.
Use this screen to change user password on the EMG.
Use this screen to enable specific traffic directions for network services.
Use this screen to view a list of public IP addresses which are allowed to
access the EMG through the services configured in the Maintenance >
Remote Management screen.
EMG6726/8726-B10A User's Guide
32