Table of Contents
Advertisement
If you have a private WAN IP address, then you cannot use Dynamic DNS.
12.2 The DNS Entry Screen
Use this screen to view and configure DNS routes on the EMG. Click Network Setting > DNS to open the
DNS Entry screen.
Figure 107 Network Setting > DNS > DNS Entry
The following table describes the fields in this screen.
Table 64 Network Setting > DNS > DNS Entry
LABEL
Add New DNS
Entry
#
Hostname
IP Address
Modify
12.2.1 Add/Edit DNS Entry
You can manually add or edit the EMG's DNS name and IP address entry. Click Add New DNS Entry in
the DNS Entry screen or the Edit icon next to the entry you want to edit. The screen shown next appears.
Figure 108 DNS Entry: Add/Edit
Chapter 12 Dynamic DNS Setup
DESCRIPTION
Click this to create a new DNS entry.
This is the index number of the entry.
This indicates the host name or domain name.
This indicates the IP address assigned to this computer.
Click the Edit icon to edit the rule.
Click the Delete icon to delete an existing rule.
EMG6726/8726-B10A User's Guide
171
Advertisement
Table of Contents
