Table of Contents
Advertisement
Enter SSID_Example as the wireless name. Set WiFi security type to WPA2-PSK and enter ThisismyWPA-
2
PSKpre-sharedkey in the Pre-Shared Key field. Click Save.
Go to the Network Setting > Wireless > Advanced screen and select Auto in the Channel field to have
3
the EMG scan for and select an available channel automatically.
Open the Status screen. Verify your wireless and wireless security settings under Device Information and
4
check if the WLAN connection is up under Interface Status.
Chapter 4 Tutorials
EMG6726/8726-B10A User's Guide
45
Advertisement
Table of Contents
