Table of Contents
Advertisement
16.1 Overview
One Connect is a Zyxel-proprietary feature. It complies with the IEEE 1905.1 standard and allows auto-
detection and auto-configuration. Auto-configuration enables the Multy-Pro-supported extenders to
use the same wireless settings as the controller, the EMG, in a MESH network. See
for more information about Zyxel MESH (Multy Pro).
Apart from auto-configuration, you can also check the connection status, do speed test, turn on or turn
off the devices in your network, block or allow a device's access and set up a guest Wi-Fi network from
the mobile device. You can even use the App to access the EMG's web configurator.
If your wireless router supports Zyxel One Connect, EMG for example, you can download and install the
Multy Pro app in your mobile device.
To let the Multy Pro app detect the EMG, the following conditions must be met:
• The mobile device with the App installed must be connected to the EMG wirelessly.
• One Connect is enabled in this screen.
Figure 118 Multy Pro App
16.2 The Home Connectivity Screen
Use this screen to enable or disable One Connect on the EMG.
Note that when Multy Pro is enabled in the Network Setting > Wireless > MESH screen, One Connect will
be enabled and grayed out automatically. To disable One Connect, please deactivate Multy pro in the
Network Setting > Wireless > MESH screen.
Click Network Setting > Home Connectivity to open the following screen.
Figure 119 Network Setting > Home Connectivity
Home Connectivity
EMG6726/8726-B10A User's Guide
184
C
H A P T E R
16
Section 7.7 on page 87
Advertisement
Table of Contents
