Ping & Traceroute & Nslookup - ZyXEL Communications EMG8726-B10A User Manual

37.3 Ping & TraceRoute & NsLookup
Use this screen to ping, traceroute, or nslookup an IP address. Click Maintenance > Diagnostic >
Ping&TraceRoute&NsLookup to open the screen shown next.
Figure 184 Maintenance > Diagnostic > Ping &TraceRoute&NsLookup
The following table describes the fields in this screen.
Table 129 Maintenance > Diagnostic > Ping & TraceRoute & NsLookup
LABEL
URL or IP
Address
Ping
Ping 6
Trace Route
Trace Route 6
Nslookup
37.4 802.1ag
Click Maintenance > Diagnostic > 802.1ag to open the following screen. Use this screen to perform CFM
actions.
Chapter 37 Diagnostic
DESCRIPTION
Type the IP address of a computer that you want to perform ping, traceroute, or nslookup in
order to test a connection.
Click this to ping the IPv4 address that you entered.
Click this to ping the IPv6 address that you entered.
Click this to display the route path and transmission delays between the EMG to the IPv4
address that you entered.
Click this to display the route path and transmission delays between the EMG to the IPv6
address that you entered.
Click this button to perform a DNS lookup on the IP address of a computer you enter.
EMG6726/8726-B10A User's Guide
270