The Dns Route Add Screen; The Policy Route Screen - ZyXEL Communications XMG3512-B10A User Manual

Table 39 Network Setting > Routing > DNS Route (continued)
L ABEL
Subnet Mask
Modify
9.3.1 T he DNS Ro ute Add Sc re e n
You can manually add the XMG's DNS route entry. Click
Ro uting > DNS Ro ute
DNS Route Add
Fig ure 63
The following table describes the labels in this screen.
Table 40 DNS Route Add
L ABEL
Active
Domain Name
Subnet Mask
WAN Interface
OK
Cancel
9.4 T he Po lic y Ro ute Sc re e n
Traditionally, routing is based on the destination address only and the XMG takes the shortest path to
forward a packet. Policy route allows the XMG to override the default routing behavior and alter the
packet forwarding based on the policy defined by the network administrator. Policy-based routing is
applied to outgoing packets, prior to the normal routing.
You can use source-based policy forwarding to direct traffic from different users through different
connections or distribute traffic among multiple paths for load sharing.
Chapter 9 Routing
DESC RIPT IO N
This is the subnet mask of the DNS route entry.
Click the icon to modify the DNS route.
Edit
Click the icon to delete the DNS route.
De le te
screen. The screen shown next appears.
DESC RIPT IO N
Select to enable or disable this DNS route.
Enter the domain name of the DNS route entry.
Enter the subnet mask of the DNS route entry.
Select the WAN connection through which the XMG forwards DNS requests for this domain
name.
Click this to save your changes.
Click this to exit this screen without saving any changes.
XMG3512-B10A User's Guide
Add Ne w DNS Ro ute
127
in the
Ne two rk Se tting >