The Dns Route Add Screen; The Policy Route Screen - ZyXEL Communications VMG3312-T20A User Manual

Table 40 Network Setting > Routing > DNS Route (continued)
LABEL
Subnet Mask
Modify

9.3.1 The DNS Route Add Screen

You can manually add the VMG's DNS route entry. Click Add New DNS Route in the Network Setting >
Routing > DNS Route screen. The screen shown next appears.
Figure 66 DNS Route Add
The following table describes the labels in this screen.
Table 41 DNS Route Add
LABEL
Active
Domain Name
Subnet Mask
WAN Interface
OK
Cancel

9.4 The Policy Route Screen

Traditionally, routing is based on the destination address only and the VMG takes the shortest path to
forward a packet. Policy route allows the VMG to override the default routing behavior and alter the
packet forwarding based on the policy defined by the network administrator. Policy-based routing is
applied to outgoing packets, prior to the normal routing.
You can use source-based policy forwarding to direct traffic from different users through different
connections or distribute traffic among multiple paths for load sharing.
Chapter 9 Routing
DESCRIPTION
This is the subnet mask of the DNS route entry.
Click the Edit icon to modify the DNS route.
Click the Delete icon to delete the DNS route.
DESCRIPTION
Select Enable or Disable to activate or deactivate the DNS route.
Enter the domain name of the DNS route entry.
Enter the subnet mask of the DNS route entry.
Select the WAN connection through which the VMG forwards DNS requests for this domain
name. WWAN means the wireless cellular interface.
Click this to save your changes.
Click this to exit this screen without saving any changes.
VMG3312-T20A User's Guide
141