Seat Heater (If Equipped) - Subaru WRX 2021 Owner's Manual

Seat heater (if equipped)

The front seats are equipped with a seat
heater.
The seat heater operates when the ignition
switch is either in the "ACC" or "ON"
position.
CAUTION
. People with delicate skin may
suffer slight burns even at low
temperatures if they use the seat
heater for a long period of time.
When using the heater, always be
sure to warn the persons con-
cerned.
. Do not put anything on the seat
which insulates against heat,
such as a blanket, cushion, or
similar items. This may cause the
seat heater to overheat.
. When the seat is warmed enough
or before you leave the vehicle,
be sure to turn off the seat heater.
NOTE
Use of the seat heater for a long period
of time while the engine is not running
can cause battery discharge.
Type A
Type B
Seat, seatbelt and SRS airbags/Seat heater
1) HIGH (HI) – Rapid heating
2) LOW (LO) – Normal heating
3) Off
A) Left-hand side
B) Right-hand side
To turn on the seat heater, push the "LOW"
("LO") or "HIGH" ("HI") position on the
switch, as desired, depending on the
temperature.
Selecting the "HIGH" ("HI") position will
cause the seat to heat up quicker.
To turn off the seat heater, lightly press the
opposite side of the current position.
The indicator located on the switch illumi-
nates when the seat heater is in operation.
When the seat is warmed enough or
before you leave the vehicle, be sure to
turn the switch off.
1-7